Home support & service reselling your account Search
CadParts Fastener Library & Insertion Program
by 'CadParts, Inc.'
This is a SolidWorks Certified Gold Product. The Library has over 11,000 Standard Fasteners plus most of the Pem Fasteners. The Library comes with an Insertion Program, which allows the user to insert and mate Fasteners into the Assembly by merely selecting the fastener and edge/s in the assembly where the Fastener is to be inserted. The Library and Insertion Program is compatible with SolidWorks 98 through the latest version of SolidWorks.

MSRP: $149.95
CADalog.com: $129.99

Add the CD-ROM to your cart
Product Features Product Support Free Trial version


The Cadparts Fastener Library has over 11,000 Fasteners. All of the Fasteners carry dimensions as given in The Industrial Fastener Institute (IFI) and ANSI Standards. All of the Fasteners are modeled in SolidWorks.

The entire library contains:

  • Cap Screws – Inch Sizes: Grade 2, 5, &8, Nylon, Brass, Stainless and Silicon Bronze
  • Carriage Bolts – Inch Sizes
  • Square Head Bolts – Inch Sizes
  • Nuts – Inch Sizes: Regular, Coupling, Finished Jam, Locking Flange, Heavy Full, Heavy Jam, Machine Screw, Nylon Locking, Panel, Reversible Lock, Square Nuts
  • Screws – Inch Sizes: Binding Head, Fillister Head, Flat Head, Socket Head Cap Screws, Socket Button Head Cap Screws, Socket, Flat Head, Socket Head Low Head, Pan Head, Round Head, Truss Head
  • Screws – Metric Sizes: Socket Head Cap Screws
  • Shoulder Screws – Inch Sizes
  • Washers – Inch Sizes: C’Sunk Finish Washer, Flat Washer, Lock Washers, External Tooth, Internal Tooth

PEM Hardware - Metric & Inch:

  • Blind Fastener, Floating Nut, PC Board, Pem Nut, Pin, Blind Standoffs, Snap Top Standoffs, Thru Clearance Standoffs, Thru Threaded Standoffs, Flush Studs, Non Flush Studs, Hi Strength Studs

Library has over 11,000 parts

  • SolidWorks has given this Product a -Certified Gold Product- status.
  • Library is fully Compatible with SolidWorks 98 through the latest version of SolidWorks
  • The Insertion Program is fully embedded within SolidWorks 2003 and beyond
  • For older version of SolidWorks (1998 through 2002), the Insertion Program can be easily added to the SolidWorks menu.

    Program as an Add-In.

    • The CadParts Insertion Program is installed automatically from the CD
    • The Library can be loaded on the user's PC or on a company server
    • The Insertion Program is activated by going into the -Tool- pull down menu within SolidWorks and selecting -Add-Ins- and then selecting CadParts
    • A CadParts Fastener Icon appears on the SolidWorks Tool Bar after being turned on
    • By selecting the Fastener Icon, the Insertion Program is activated
    • A dialog box appears in the SolidWorks -Feature Manager-
    • The Operator selects the Fastener from a pull down menu
    • The Operator selects the edge/s on as many faces as desires
    • The Operator selects OK and the fasteners are automatically inserted and mated
    • Nuts, Bolts, Screws, etc
    • All models accurately modeled per industry standards.
    • Inch size only - metric not yet available
    • Pem(R) Inserts
    • Over 95% of fasteners are included - both inch and metric

    Each Library Part has engineering information embedded in the file

    • Nuts, Bolts, Screws, etc
    • Recommended Torque values are shown
    • Thread Cross Sectional area of fastener is listed
    • Clamp Load resulting from recommended Torque is shown
    • Tensile Strength and proof load are shown
    • Recommended tap drill size is shown
    • Head size and Height is also shown
    • Complete Description per industry standard including material will be printed in the Bill of Material allowing purchasing to buy correct part

    Fully Compatible with SolidWorks Bill of Material

    • File Name will be printed in Bill of Material automatically in the Part Number field. The File Name can easily be changed to correspond to company's part number.
    • Description per Industry Standard will be printed in Bill of Material automatically

    Unique Parts

    • Customers can create their own parts that are compatible with the CadParts insertion program by following two simple rules during the modeling of the part.
    • Customers can modify library parts for different head sizes or lengths using the SolidWorks edit commands.

    License Requirements

    One license is required per user

    support & service reselling corporate your account

    Copyright © 2022 Internet Business Systems, Inc. | Privacy Policy | Legal